Not your device? | Select another

How do I wall-mount my FLIR Secure™ indoor camera?

Before wall-mounting the camera:

  • Determine the best mounting position to get a view of the area you want. Ensure the power cable is long enough to power the camera.

  • Before permanently installing the camera, it is recommended to complete the setup using the FLIR Secure™ app to connect the camera to your Wi-Fi network.

  • It is also a good idea to install the camera in an area with a strong Wi-Fi signal from your router. You can check the Wi-Fi signal using the signal indicator on your mobile device

    CAUTION: Keep the cables at least 3ft / 1m away from baby cribs and out of reach of children and infants. Use the included cable clips to help manage the cables.

How to install the camera

  1. Use a flat-head screwdriver (recommended, not included) to remove the mounting plate on the bottom of the camera base.

  2. Use a pencil to mark holes for the mounting screws.

  3. Drill holes where marked using a drill. Tap the included anchors into the holes gently using a hammer. Attach the mounting plate to the wall using the included mounting screws.

  4. Attach the camera base to the mounting plate. Make sure to push the camera base all the way to secure the camera to the mounting plate. You will hear a click noise when the camera base is securely attached to the mounting plate.

Last Updated: 7/29/2016