NOTE: The REC LED located on the top of the camera will glow orange to indicate the camera is charging. It will glow green when the camera is finished charging. The battery will take 6 hours to fully charge. You can connect the power adapter to either the USB port on the camera or camera stand. Do not connect a USB cable to both the camera and the stand at the same time. You can connect the power adapter and USB cable to the camera or camera stand. Do not connect a USB cable to both the camera and stand at the same time.
The camera will turn on automatically when the power is connected and the REC LED will turn on. If camera does not turn on, press the power button to turn on the camera.
If a you are new user, enter your email address and password and tap Sign Up.
Tap Add your first camera.
Select either Indoor or Outdoor, depending on your camera type.
Charge your camera for at least 20 minutes before continuing the setup then tap Continue.
Scan the QR code on your camera, which is located on the bottom of the indoor stand. OR tap and manually enter the number printed under the QR code.
NOTE: The Wi-Fi network will be named something like "FX-fxvdb30b2744".
The LED on the camera will flash while the camera is connecting to the Wi-Fi network. When it finishes connecting, it will glow green and the app will display the screen below.
Last Updated: 6/24/2015