Not your device? | Select another

How do I set up my FLIR FX camera using an iPad®?

  1. Download the FLIR FX app from the App Store.

  2. Connect the included USB cable to the power adapter. Connect the other end of the USB cable to the camera and connect the power adapter to a power outlet.

    NOTE: The REC LED will glow orange to indicate the camera is charging. It will glow green when the camera is finished charging. The battery will take 6 hours to fully charge. You can connect the power adapter to either the USB port on the camera or camera stand. Do not connect a USB cable to both the camera and the stand at the same time.

  3. Camera turns on automatically when power is connected and the REC LED will turn on. If camera does not turn on, press the power button to turn on the camera. The camera will start up and the LED on the back of the camera will glow orange.

  4. Open the app. Tap New User to create a new account or tap Existing User if you already have an account (for example, if you bought the camera from the FLIR website).

  5. If a you are new user, enter your email address and password and tap Sign Up.

  6. Tap Add your first camera.

  7. Select either Indoor or Outdoor, depending on your camera type.

  8. Charge your camera for at least 20 minutes before continuing the setup then tap Continue.

  9. Scan your camera's QR code, which is located on the bottom of the indoor stand. OR tap and manually enter the number printed beneath the QR code.

  10. Check the LEDs on the back of the camera. If the LED is glowing, tap Steady Orange.

    NOTE: If you are using an outdoor camera, the app will prompt you to remove the camera from the outdoor housing to check the LED color.

  11. After selecting , tap the Home button . Open the Settings menu and connect your iPhone® to the Wi-Fi network created by the camera.

    NOTE: The network will be listed similarly to something like "FX-litfcce54fc4".

  12. Tap the Home button  twice and return to the FLIR FX app. The app will connect to your camera's Wi-Fi network.
  13. Give your camera a name and password and press Set. The camera name can be anything you want, such as the location of the camera (e.g., “Front Door”) or how the camera will be used (e.g., “Sports Camera”).

  14. Select your Wi-Fi network from the list. Enter the password for your Wi-Fi network and tap Connect.

  15. The LED on the camera will flash while the camera is connecting to the Wi-Fi network. When it finishes connecting, it will glow green and the app will display the screen below.

  16. Tap Done. Tap on the camera in the camera list to connect to the live view.

    NOTE: If you enter the wrong Wi-Fi password, the camera will attempt to connect to the network for 60 seconds. If it cannot connect within that time, it will return to Direct Mode and the will turn on. Once the is glowing, retry the setup.

Last Updated: 6/24/2015