NOTE: The REC LED located on top of the camera will glow orange to indicate the camera is charging. It will glow green when the camera is finished charging. The battery will take 6 hours to fully charge. You can connect the power adapter to either the USB port on the camera or camera stand. Do not connect a USB cable to both the camera and the stand at the same time.
The camera will turn on automatically when the power is connected and the REC LED will turn on. If the camera does not turn on, press the power button to turn on the camera.
Select either Indoor or Outdoor, depending on your camera type.
Charge your camera for at least 20 minutes before continuing the setup then tap Continue.
Wait for the app to automatically connect your smartphone or tablet to the Wi-Fi network created by the camera.
NOTE: In some cases, the app may not be able to connect your phone to the camera's Wi-Fi network. To continue setup, you will need to select the color of the LED on the back of camera. Then connect your Android device to the camera's Wi-Fi network (will look something like "FX-fxvdb30b2744").
Give your camera a name and password and press Set. The camera name can be anything you want, such as the location of the camera (e.g., “Front Door”) or how the camera will be used (e.g., “Sports Camera”).
The LED on the camera will flash while the camera is connecting to the Wi-Fi network. When it finishes connecting, it will glow green and the app will display the screen below.
Tap Done. Tap on the camera in the camera list to connect to the live video.
NOTE: If you enter the wrong Wi-Fi password, the camera will attempt to connect to the network for 60 seconds. If it cannot connect within that time, it will return to Direct Mode and the will turn on. Once the is glowing, retry the setup.
Last Updated: 6/24/2015